Download the whole Issue (in PDF format)
A. V. Minitskyi, P. I. Loboda, Ie. G. Byba, I. Yu. Trosnikova, O. I. Khovavko
«Effect of Production Methods on the Microstructure, Phase Composition, and Properties of Hard Alloy VK8 with Submicron Grain
»
0799–0806 (2021)
PACS numbers: 61.05.cp, 61.43.Gt, 62.20.Qp, 68.37.Hk, 81.07.Wx, 81.20.Ev, 81.65.Ps
The effect of manufacturing process on the microstructure, phase composition, and properties of hard alloy VK8 that can be used for the cores of small armour-piercing ammunitions is revealed. According to the results obtained by scanning electron microscopy, x-ray phase analysis, and durometry, the sintering kinetics of the hard alloy VK8 allows forming a fine-grained microstructure with different levels of microstresses, depending on the production technique, which affects the mechanical properties of the material.
Key words: hard alloy, tungsten carbide, spark plasma-enhanced sintering, electron beam-assisted sintering, radiation sintering, hardness, microstresses
https://doi.org/10.15407/nnn.19.04.799
References
1. V. S. Panov and A. M. Chuvilin, Tekhnologiya i Svoistva Spechennykh
Tverdykh Splavov i Izdeliy iz Nikh (Moscow: Izd-vo MISiS: 2001) (in Russian).
2. R. Kieffer and F. Benezovskij, Tverdyye Splavy [Hard Alloys] (Moscow: Metallurgiya:
1971) (Russian translation).
3. P. Schwarzkopf and R. Kieffer, Cemented Carbides (New York: Macmillan:
1960).
4. A. F. Lisovskij, Sverkhtverdyye Materialy, 6: 31 (2010) (in Russian).
5. Yu. I. Gordeev, A. K. Abkaryan, A. S. Binchurov, V. B. Yasinskiy, I. V. Karpov,
A. A. Lepeshev, O. L. Khasanov, and E. S. Dvilis, Journal of Siberian Federal
University. Engineering & Technologies, 3: No. 7: 270 (2014) (in Russian).
6. I. Yu. Trosnikova and P. I. Loboda, Journal of Superhard Materials, 41, No. 1:
49 (2019); https://doi.org/10.3103/S1063457619010076
7. E. A. Levashov, V. S. Panov, and I. Yu. Konyashin, Izvestiya VUZov.
Poroshkovaya Metallurgiya i Funktsional’nyye Pokrytiya, 3: 14 (2017) (in
Russian).
8. H. Kramar, L. Bodrova, Ya. Kovalchuk, S. Marynenko, and I. Koval, Scientific
Journal of the TNTU, 3, No. 91: 25 (2018);
https://doi.org/10.33108/visnyk_tntu2018.03.063
9. Xingxing Lyu, Xiaosong Jiang, Hongliang Sun, and Zhenyi Shao, Nanotechnology
Reviews, 9: 543 (2020); https://doi.org/10.1515/ntrev-2020-0044.
10. I. Azcona, A. Ordonez, J. M. Sanchez, and F. Castro, Journal of Materials Science,
37, No. 19: 4189 (2002); https://doi.org/10.1023/A:1020048105585
11. Chengchang Jia, Lan Sun, Hua Tang, and Xuanhui Qu, International Journal
of Refractory Metals and Hard Materials, 25, No. 1: 53 (2007);
https://doi.org/10.1016/j.ijrmhm.2005.11.003
12. E. A. Lantsev, V. N. Chuvil’deev, A. V. Nokhrin, M. S. Boldin, N. V.
Malekhonova, Y. V. Blagoveshchenskii, N. V. Isaeva, Y. V. Tsvetkov, P. V. Andreev,
and K. E. Smetanina, IOP Conf. Series: Materials Science and Engineering,
1014: 012020; https://doi.org/10.1088/1757-899X/1014/1/012020
13. V. N. Chuvil’deev, A. V. Moskvicheva, M. S. Boldin, N. V. Sakharov et al.,
Vestnik Nizhegorodskogo Universiteta im. N. I. Lobachevskogo, 2, No. 2: 115
(2013) (in Russian).
14. O. P. Karasevs’ka, ². Yu. Trosn³kova, and P. ². Loboda,, Rentgenostrukturnyy
Anal³z Mater³al³v u Dyspersnomu Stan³ (Kyiv: Politekhnika: 2017) (in
Ukrainian).
|