Collection of scientific works Nanosystems, nanomaterials, nanotechnologies Year 2023 Volume 21, Issue 2
English Ukrainian
Get the article →
vol year page
Issues PACS For subscribers For authors
Search →
Advanced Search

Issues

 / 

2023

 / 

vol. 21 / 

Issue 2

 


Download the full version of the article (in PDF format)

P. E. Trofimenko, M. V. Naida, O. V. Khomenko, and S. P. Latin
Methods of Investigation of the Phase-Contact Surface Created by Drops of the Sprayed Liquid
0391–0402 (2023)

PACS numbers: 47.20.Ib, 47.61.-k, 62.25.-g, 68.08.-p, 68.15.+e, 81.20.Rg, 83.80.Hj

The main purpose of dispersing devices is to convert a continuous flow of liquid into a dispersed system consisting of drops of liquid. There are two ways to convert fluid jets into thin films: hydrostatic (on an inclined plate) and centrifugal (on the film-forming—blade). The process of spraying or dispersing is generally as follows. From the film-forming element (plate or blade), the liquid in the form of a thin flat film moves at a certain relative speed into the gaseous medium, interacting with which the film is destroyed, turns into a stream of drops (spray torch). Many groups of scientists and a number of institutes have been engaged in the study of the spray heat and mass transfer. It makes sense to consider the size of the drops rationally seek to achieve in industrial technology, when using the heat and mass transfer contact devices of the spray type. In other words, what size of droplets should give technical, energy and other advantages for the best use of the effect of the rate of change of the contact surface of the phases? The main disadvantages of fine spraying are: problems of obtaining the minimum sizes (due to big turns of centrifugal sprayers or big pressure and low productivity of nozzle sprayers); high energy consumption; large loss of drops (fighting it is the task, which is even more difficult than getting small drops); large evaporation (i.e., the smaller the diameter of the droplets, the faster they evaporate). The latter can be a useful effect, but sometimes, it is completely unacceptable for many technological processes. Advantages of bulk spraying are quite simple equipment for such spraying, small loss of drops, energy consumption many times less than with traditional methods of spraying liquids (nozzle, centrifugal, etc.).

Key words: film, immersion fluid, film former, local thickness, centrifugal sprayer, drop.

https://doi.org/10.15407/nnn.21.02.391

References
  1. V. N. Uzhov and A. G. Val’dberg, Podgotovka Promyshlennykh Gazov k Ochistke [Preparation of Industrial Gases for Purification] (Moskva: Khimiya: 1975) (in Russian).
  2. A. M. Lastovtsev, Trudy MIKhM, 11: 41 (1957) (in Russian).
  3. A. Wegener, Termodinamika Atmosfery [Thermodynamics of the Atmosphere] (Moskva–Leningrad: ONTI: 1935) (Russian translation).
  4. L. M. Levin, Issledovanie po Fizike Grubodispersnykh Aehrozoley [Research on the Physics of Coarse Aerosols] (Moskva: AN SSSR: 1961) (in Russian).
  5. M. Wicks III and A. E. Dukler, Novyy Metod Izmereniya Raspredeleniya Razmerov Kapel’ Ehlektroprovodnoy Zhidkosti v Dvukhfaznom Potoke. Dostizheniya v Oblasti Teploobmena [A New Method for Measuring the Size Distribution of Electrically Conductive Liquid Droplets in a Two-Phase Flow. Advances in Heat Transfer] (Moskva: Mir: 1970), p. 24 (Russian translation).
  6. E. G. Bratuta, Diagnostika, Rashchyot i Intensifikatsiya Protsessov s Dispersnymi Gazozhidkostnymi Potokami v Ob’yektakh Ehnergetiki Metallurgii i Apparatakh Zashchity Okruzhayushchey Sredy [ Diagnostics, Calculation and Intensification of Processes with Dispersed Gas–Liquid Flows in Energy Facilities of Metallurgy and Environmental Protection Devices] (Thesis of Disser. for Dr. Techn. Sci.) (Kharkov: KhPI: 1986) (in Russian).
  7. E. G. Bratuta and L. A. Zanochkin, Energeticheskoye Mashinostroyenie, 4: 71 (1984) (in Russian).
  8. N. A. Fuchs, Uspekhi Khimii, V, No. 12: 1652(54) (1936) (in Russian).
  9. G. K. Lebedyuk and B. K. Barlyaev, Khimicheskaya Promyshlennost’, 1: 48 (1967) (in Russian).
  10. A. V. Khomenko, Ya. A. Lyashenko, and L. S. Metlov, Metallofiz. Noveishie Tekhnol., 30, No. 6: 859 (2008) (in Russian).
  11. A. V. Khomenko, Ya. A. Lyashenko, and V. N. Borisyuk, Fluct. Noise Lett., 9, No. 1: 19; https://doi.org/10.1142/S0219477510000046
  12. A. Khomenko, M. Khomenko, B. Persson, and K. Khomenko, Tribol. Lett., 65, No. 2: 71 (2017); https://doi.org/10.1007/s11249-017-0853-5
  13. A. V. Khomenko, N. V. Prodanov, and B. N. J. Persson, Condens. Matter Phys., 16, No. 3: 33401 (2013); https://doi.org/10.5488/CMP.16.33401
  14. A. I. Rodionov and A. M. Kashnikov, Khimicheskaya Promyshlennost’, 3: 209 (1967) (in Russian).
  15. V. M. Efimov, A. M. Iskol’dskiy, and Yu. E. Nesterikhin, Ehlektronno-Opticheskaya Fotos’yomka v Fizicheskom Ehksperimente [Electron-Optical Photography in a Physical Experiment] (Novosibirsk: Nauka: 1978) (in Russian).
  16. P. Trofimenko and M. Naida, Int. Appl. Mech., 53, No. 1: 116 (2017); https://doi.org/10.1007/s1077
  17. P. E. Trofimenko, M. V. Naida, and A. V. Khomenko, Nanosistemi, Nanomateriali, Nanotehnologii, 18, Iss. 3: 565 (2020); https://doi.org/10.15407/nnn.18.03.565
.
Creative Commons License
This article is licensed under the Creative Commons Attribution-NoDerivatives 4.0 International License
©2003—2023 NANOSISTEMI, NANOMATERIALI, NANOTEHNOLOGII G. V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine.
E-mail: tatar@imp.kiev.ua Phones and address of the editorial office About the collection User agreement